Ki Max Punch Master Free Standing Punching Bags

(B237N-KiMax) - Top quality 6ft free standing Punch Master with numbers
* High density foam top with plastic base sitting on a solid PVC tube
* Ideal for target numbered combination drills
* Fill base with water or sand for maximum stability
* Approx. 140 x 42 cm top bag plus big capacity 40 x 60 cm base
* Excellent stability, designed for typical light weight free sparring striking
* Great for speed, accuracy and endurance training
* Perfect for honing your 360 degrees sparring speed striking combinations
* May move with excessive force or if you push with your strikes.
* Ideal for supervised personal training use only
* Not recommended for heavy commercial use
* Also not suitable for power striking, kicking or hitting with batons or any hard or sharp object
* This is not a full contact 'slam bag' or designed for hard hitting martial artists
* Product is only designed for light weight sparring with the use of protective padded gloves
* No jewellery or weaponry should be used on the product as it may cause severe wear and possible serration of the product
* Misuse of product is not covered by warranty
* The Punch Master should remain stationary at all times especially whilst punching. The bag is not designed to be tilted. The Punch Master does not have a flexible centre. If the bag is tilted on the side for training or rolled away for storage the base will break.
* Moving of the punch master when filled with either sand or water is a two man operation. Please take care when lifting or relocating punch master.
* The Punch Master free stand bag is comprised of 3 parts. 1 x Base 1 x Small Inner Base Tube 1 x Foam top with Inner plastic cylinder.
* To assemble first insert Small Inner Base Tube through bottom of base.
Position Base on the floor where you want to be using your bag.
Take the foam top; expose the Inner plastic cylindrical tube until holes are visible. (The long inner plastic cylindrical tube is usually found inside the foam top and can be very tight fitting)
Match up holes with Small Inner Base Tube, Secure with screws.
Adjust foam top to meet the base.
Fill with water or sand.

Note: Free standing punching bags are not available to countries outside Australia.

Masters Tips: Always use good quality bag mitts or boxing gloves to reduce impact. Don't focus on power. Work on balance, accuracy, defence, footwork, timing, speed and endurance. Real power comes when you are relaxed and when you have mastered all the elements.

(B237N-KiMax) - Top quality 6ft free standing Punch Master with numbers
* High density foam top with plastic base sitting on a solid PVC tube
* Ideal for target numbered combination drills
* Fill base with water or sand for maximum stability
* Approx. 140 x 42 cm top bag plus big capacity 40 x 60 cm base
* Excellent stability, designed for typical light weight free sparring striking
* Great for speed, accuracy and endurance training
* Perfect for honing your 360 degrees sparring speed striking combinations
* May move with excessive force or if you push with your strikes.
* Ideal for supervised personal training use only
* Not recommended for heavy commercial use
* Also not suitable for power striking, kicking or hitting with batons or any hard or sharp object
* This is not a full contact 'slam bag' or designed for hard hitting martial artists
* Product is only designed for light weight sparring with the use of protective padded gloves
* No jewellery or weaponry should be used on the product as it may cause severe wear and possible serration of the product
* Misuse of product is not covered by warranty
* The Punch Master should remain stationary at all times especially whilst punching. The bag is not designed to be tilted. The Punch Master does not have a flexible centre. If the bag is tilted on the side for training or rolled away for storage the base will break.
* Moving of the punch master when filled with either sand or water is a two man operation. Please take care when lifting or relocating punch master.
* The Punch Master free stand bag is comprised of 3 parts. 1 x Base 1 x Small Inner Base Tube 1 x Foam top with Inner plastic cylinder.
* To assemble first insert Small Inner Base Tube through bottom of base.
Position Base on the floor where you want to be using your bag.
Take the foam top; expose the Inner plastic cylindrical tube until holes are visible. (The long inner plastic cylindrical tube is usually found inside the foam top and can be very tight fitting)
Match up holes with Small Inner Base Tube, Secure with screws.
Adjust foam top to meet the base.
Fill with water or sand.

Note: Free standing punching bags are not available to countries outside Australia.

Masters Tips: Always use good quality bag mitts or boxing gloves to reduce impact. Don't focus on power. Work on balance, accuracy, defence, footwork, timing, speed and endurance. Real power comes when you are relaxed and when you have mastered all the elements.